ֱ

Store Locator

Rockler Cutting Board Juice ֱ Routing Jig

Greatly simplifies the process of routing a uniform juice groove around the perimeter of cutting boards up to 18'' x 18'' in size.

Item #
BDL65130

As low as $69.99

Oversold Until 11/01/2023
$69.99   Rockler Cutting Board Juice ֱ Routing Jig (65130)

$69.99

Summary

    Get Expert Advice

    Return Policy

    To prevent juices from dripping off the edge of your cutting board, a smoothly routed groove around the edge is essential. Our Juice ֱ Routing Jig makes the process of routing the grooves easy, accurate and adjustable. The jig adjusts to accommodate cutting boards up to 18'' x 18'' in size, and includes attachments to create corner radii and to rout channels around square, round or triangular through-handle openings. Use the jig with our optional Rounded-Shoulder Juice ֱ Router Bits, available here in two groove widths: 3/8'' and 1/2'', big enough for even the juiciest watermelon, but not so big that the grooves are distracting or detract from usable space.

    Juice ֱ Routing Jig Details:

    • Adjusts in both directions to simplify the process of routing a uniform juice groove on cutting boards up to 18'' x 18'' in size
    • Rides against rails and corner guides to rout a groove centered 1'' in from the edges
    • Use with cutting boards from 3/4'' to 1-1/4'' thick; thicker boards require spacers under the jig, while thinner boards require a spacer under the board
    • Guide bushing mounts to any plunge router baseplate with a 1-1/4'' diameter center hole
    • Clamping brackets mount to the outside of the rails so jig can be clamped to the work surface or attached to a substrate with #8 screws
    • Clamping brackets attach in two orientations—one for cutting boards from 3/4'' to 1'' thick and another for boards from 1'' to 1-1/4'' thick
    • Corner radius guides produce a curve at the corners with a 1/2'' radius on the inside edge
    • Includes three additional corner guides for offsetting a juice groove around handle openings made with a 1-1/4'' diameter Forstner bit or the triangular or square section of the Rockler 4-in-1 Cutting Board Handle Routing Template (#68393, sold separately)
    • Works with our Rockler Rounded-Shoulder Juice ֱ Bits (sold separately), which work similarly to core box bits, but also apply a nicely rounded edge to the groove

    Important Note: Use only with a plunge router. Router bits sold separately.

    Rockler Cutting Board Juice ֱ Routing Jig
    (4) 22'' Rails
    (4) Clamping Brackets
    (4) Corner Guides
    (1) Guide Bushing with Lock Ring
    (16) Flathead Screws
    (16) Washer Nuts
    (4) Support Brackets
    (1) Corner Guide for Triangular Handle
    (1) Corner Guide for Square Handle
    (1) Corner Guide for Circular Handle
    (1) Hex Key

    More Information
    Brand Rockler
    Tech Spec
    • Brand: Rockler
    • Rail Material: Extruded PVC
    • Rail Dimensions: Approximately 1'' thick x 2'' wide x 22'' long
    • Guide and Clamp Block Material: ABS plastic
    • Corner Guide Radius: Produces a 1/2'' radius on inside corner of groove

    Prop 65 WarningWARNING:
    This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information go to